Cisco 15327 - Manual (Page 12)

Contents
xii
Ethernet Card Software Feature and Configuration Guide, R7.2
EoMPLS Configuration on PE-CLE SPR Interface 18-8
Bridge Group Configuration on MPLS Cloud-facing Port 18-8
Setting the Priority of Packets with the EXP 18-9
EoMPLS Configuration Example 18-9
Monitoring and Verifying EoMPLS 18-12
Understanding MPLS-TE 18-13
RSVP on the ML-Series Card 18-13
Ethernet FCS Preservation 18-13
Configuring MPLS-TE 18-14
Configuring an ML-Series Card for Tunnels Support 18-14
Configuring an Interface to Support RSVP-Based Tunnel Signalling and IGP Flooding 18-14
Configuring OSPF and Refresh Reduction for MPLS-TE 18-15
Configuring an MPLS-TE Tunnel 18-15
MPLS-TE Configuration Example 18-16
Monitoring and Verifying MPLS-TE and IP RSVP 18-18
RPRW Alarm 18-19
C H A P T E R
19 Configuring Security for the ML-Series Card 19-1
Understanding Security 19-1
Disabling the Console Port on the ML-Series Card 19-2
Secure Login on the ML-Series Card 19-2
Secure Shell on the ML-Series Card 19-2
Understanding SSH 19-2
Configuring SSH 19-3
Configuration Guidelines 19-3
Setting Up the ML-Series Card to Run SSH 19-3
Configuring the SSH Server 19-4
Displaying the SSH Configuration and Status 19-5
RADIUS on the ML-Series Card 19-6
RADIUS Relay Mode 19-6
Configuring RADIUS Relay Mode 19-7
RADIUS Stand Alone Mode 19-7
Understanding RADIUS 19-8
Configuring RADIUS 19-8
Default RADIUS Configuration 19-9
Identifying the RADIUS Server Host 19-9
Configuring AAA Login Authentication 19-11
Defining AAA Server Groups 19-13