Cisco 15327 - Manual (Page 14)

Contents
xiv
Ethernet Card Software Feature and Configuration Guide, R7.2
SONET/GFP Suppression of CRC-ALARM 21-7
Clearing of CRC-ALARM 21-7
Unwrap Synchronization 21-8
Unidirectional Errors 21-8
Bidirectional Errors 21-10
Configuring the ML-Series Card CRC Error Threshold 21-13
Clearing the CRC-ALARM Wrap with the Clear CRC Error Command 21-14
Configuring ML-Series Card RMON for CRC Errors 21-15
Configuration Guidelines for CRC Thresholds on the ML-Series Card 21-15
Accessing CRC Errors Through SNMP 21-15
Configuring an SNMP Trap for the CRC Error Threshold Using Cisco IOS 21-16
Determining the ifIndex Number for an ML-Series Card 21-18
Manually Checking CRC Errors on the ML-Series Card 21-19
Displaying RMON Status 21-20
C H A P T E R
22 Configuring SNMP 22-1
Understanding SNMP 22-1
SNMP on the ML-Series Card 22-2
SNMP Versions 22-3
SNMP Manager Functions 22-3
SNMP Agent Functions 22-4
SNMP Community Strings 22-4
Using SNMP to Access MIB Variables 22-4
Supported MIBs 22-5
SNMP Notifications 22-5
Configuring SNMP 22-6
Default SNMP Configuration 22-6
SNMP Configuration Guidelines 22-6
Disabling the SNMP Agent 22-7
Configuring Community Strings 22-7
Configuring SNMP Groups and Users 22-9
Configuring SNMP Notifications 22-10
Setting the Agent Contact and Location Information 22-12
Limiting TFTP Servers Used Through SNMP 22-13
SNMP Examples 22-13
Displaying SNMP Status 22-14
C H A P T E R
23 E-Series and G-Series Ethernet Operation 23-1
G-Series Application 23-1