Cisco 15327 - Manual (Page 562)

B-4
Ethernet Card Software Feature and Configuration Guide, R7.2
Appendix B Unsupported CLI Commands
Unsupported POS Interface Configuration Commands (Cisco Proprietary RPR Virtual Interface)
iso-igrp
loopback
multilink-group
netbios
pos flag c2
pos mode gfp
pos scramble-spe
pos trigger delay
pos vcat defect <immediate | delayed>
pos vcat resequence
priority-group
pulse-time
random-detect
rate-limit
serial
service-policy history
source
timeout
transmit-interface
tx-ring-limit
Unsupported POS Interface Configuration Commands (Cisco
Proprietary RPR Virtual Interface)
shutdown (unsupported on ML-Series cards not including ML1000-2)
Note With Cisco proprietary RPR, a shutdown of the SPR interface puts ML1000-2 cards in passthrough
mode. This allows the card to participate in RI. ML1000-2 cards are the only ML-Series cards eligible
for RI. Other ML-Series cards fail to enter passthrough mode, when the SPR interface is shutdown.
Unsupported IEEE 802.17 RPR Interface Configuration
Commands
bandwidth
cos priority-mcast
rpr-ieee clock-source