Show ons alarm failure port – Cisco 15327 User Manual
Page 527
Advertising
A-53
Ethernet Card Software Feature and Configuration Guide, R7.2
Appendix A Command Reference
show ons alarm failure port
show ons alarm failure port
Use this command to display the port-layer failures.
Syntax Description
This command has no arguments or keywords.
Defaults
N/A
Command Modes
Privileged executive
Usage Guidelines
This command displays the set of active failures for the link layer.
Examples
router# show ons alarm failure port
Port Alarms
POS0 Active: TPTFAIL
POS1 Active: TPTFAIL
GigabitEthernet0 Active: None
GigabitEthernet1 Active: None
Related Commands
show interface
show ons alarm defect
Advertising