Show rpr-ieee failure rpr-ieee interface-number – Cisco 15327 User Manual
Page 534
A-60
Ethernet Card Software Feature and Configuration Guide, R7.2
Appendix A Command Reference
show rpr-ieee failure rpr-ieee interface-number
show rpr-ieee failure rpr-ieee interface-number
Use this command to display all inputs used to determine the failure state of each span on the
IEEE 802.17b-based RPR interface.
Syntax Description
Defaults
N/A
Command Modes
Privileged executive
Usage Guidelines
This command is primarily used for troubleshooting. Some of its information overlaps that obtained with
show rpr-ieee topology and show rpr-ieee protection commands.
Examples
router# show rpr-ieee failure rpr-ieee0
Self Detected Failures Information for Interface RPR-IEEE0
Span WEST:
Reported Debounced Current Stable Debounce
state state state for(sec) delay(sec)
HW missing IDLE IDLE IDLE 403628 0
Layer 1 IDLE IDLE IDLE 403628 0
MAC Keepalive IDLE IDLE IDLE 403628 0
Link quality IDLE IDLE IDLE 403628 0
Mate interface IDLE IDLE IDLE 403628 0
Span mismatch IDLE IDLE IDLE 403628 0
Result Self Detect = IDLE
Span EAST:
Reported Debounced Current Stable Debounce
state state state for(sec) delay(sec)
HW missing IDLE IDLE IDLE 403628 0
Layer 1 IDLE IDLE IDLE 403628 0
MAC Keepalive IDLE IDLE IDLE 403628 0
Link quality IDLE IDLE IDLE 403628 0
Mate interface IDLE IDLE IDLE 403628 0
Span mismatch IDLE IDLE IDLE 403628 0
Result Self Detect = IDLE
Related Commands
show int rpr-ieee
Parameter
Description
interface-number
IEEE 802.17b based RPR interface number. No space is included between
rpr-iee and the interface number (for example, rpr-ieee0).