Cisco 15327 - Manual (Page 581)

Index
IN-11
Ethernet Card Software Feature and Configuration Guide, R7.2
example 17-29
monitoring and verifying 17-31
understanding 17-28
MAC address and VLAN support 17-6
monitoring and verifying 17-18
packet handling operations 17-2
protection 26-8
QoS 14-10, 17-7
ring wrapping 17-3
states 26-8
steering 26-8
understanding 17-2, 26-1
RPRW 18-19
RSTP
overview 7-9
active topology, determining 7-10
BPDU
format 7-13
processing 7-14
designated port, defined 7-10
designated switch, defined 7-10
interoperability with IEEE 802.1D
described 7-15
topology changes 7-14
port roles
described 7-9
synchronized 7-12
proposal-agreement handshake process 7-11
rapid convergence
point-to-point links 7-11
root ports 7-11
root port, defined 7-10
S
script command C-3
SDH alarms 5-6
SDM
See also TCAM
configuring
autolearn 15-2
size 15-2
regions 15-1
sdm access-list command 15-3
service-policy command, traffic policies 14-16
service-policy input command 14-17
service-policy output command 14-17
service-provider networks
and customer VLANs 9-2
and IEEE 802.1Q tunneling 9-1
Layer 2 protocols across 9-10
set qos-group command 14-16
set-request operation 22-4
show bridge command 6-4
show bridge group command 6-4
show interfaces bvi command 12-5
show interfaces irb command 12-5
show interfaces port-channel command 10-9
show ip mroute command 11-35
show policy-map command 14-18
show rmon alarms command 21-20
show rmon command 21-20
show rmon events command 21-20
show rmon history command 21-20
show rmon statistics command 21-20
show sdm size command 15-3
show snmp command 22-14
show snmp group command 22-14
show snmp pending command 22-14
show snmp sessions command 22-14
show snmp user command 22-14
show tech-support command C-2
SNMP
accessing MIB variables with 22-4
agent
described 22-4
disabling 22-7
community strings