Related documentation – Cisco 15327 User Manual

Page 30

Advertising
background image

xxx

Ethernet Card Software Feature and Configuration Guide, R7.2

About this Guide

Chapter 21, “Configuring RMON,”

describes how to configure remote network monitoring (RMON)

on the ML-Series card.

Chapter 22, “Configuring SNMP,”

describes how to configure the ML-Series card for operating with

Simple Network Management Protocol (SNMP).

Chapter 23, “E-Series and G-Series Ethernet Operation,”

details and explains the features and

operation of E-Series and G-Series Ethernet cards for the ONS 15454, ONS 15454 SDH and
ONS 15327 platform.

Chapter 24, “CE-100T-8 Ethernet Operation,”

details and explains the features and operation of

CE-100T-8 Ethernet card .

Chapter 25, “CE-1000-4 Ethernet Operation,”

describes the operation of the CE-1000-4 card.

Appendix A, “Command Reference,”

is an alphabetical listing of unique ML-Series card Cisco IOS

commands with definitions and examples.

Appendix B, “Unsupported CLI Commands,”

is a categorized and alphabetized listing of Cisco IOS

commands that the ML-Series card does not support.

Appendix C, “Using Technical Support,”

instructs the user on using the Cisco Technical Assistance

Center (Cisco TAC) for ML-Series card problems.

Related Documentation

Use the Ethernet Card Software Feature and Configuration Guide, R7.2 in conjunction with the
following general ONS 15454 or ONS 15454 SDH system publications:

Cisco ONS 15454 Procedure Guide

Provides procedures to install, turn up, provision, and maintain a Cisco ONS 15454 node and
network.

Cisco ONS 15454 SDH Procedure Guide

Provides procedures to install, turn up, provision, and maintain a Cisco ONS 15454 SDH node and
network.

Cisco ONS 15454 Reference Manual

Provides detailed card specifications, hardware and software feature descriptions, network topology
information, and network element defaults.

Cisco ONS 15454 SDH Reference Manual

Provides detailed card specifications, hardware and software feature descriptions, network topology
information, and network element defaults.

Cisco ONS 15454 Troubleshooting Guide

Provides alarm descriptions, alarm and general troubleshooting procedures, error messages, and
performance monitoring and SNMP parameters.

Cisco ONS 15454 SDH Troubleshooting Guide

Provides general troubleshooting procedures, alarm descriptions and troubleshooting procedures,
error messages, and performance monitoring and SNMP parameters.

Cisco ONS SONET TL1 Command Guide

Provides a full TL1 command and autonomous message set including parameters, AIDs, conditions,
and modifiers for the Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL, and ONS
15310-MA systems.

Advertising