Configuring the ml-series card crc error threshold, Figure 21-6 – Cisco 15327 User Manual
Page 357
Advertising
21-13
Ethernet Card Software Feature and Configuration Guide, R7.2
Chapter 21 Configuring RMON
Configuring the ML-Series Card CRC Error Threshold
Figure 21-6
Second Stage of Unwrapped Cisco proprietary RPR with Bidirectional Excessive CRC
Errors
Configuring the ML-Series Card CRC Error Threshold
Beginning in privileged EXEC mode, follow these steps to configure the ML-Series card CRC error
threshold:
Node B
Node C
Command
Purpose
Step 1
ML_Series# configure terminal
Enter global configuration mode.
Step 2
ML_Series (config)# interface interface-type
interface-number
Enters interface configuration mode.
Advertising