Show ons alarm defect pos interface-number – Cisco 15327 User Manual
Page 524
Advertising
A-50
Ethernet Card Software Feature and Configuration Guide, R7.2
Appendix A Command Reference
show ons alarm defect pos interface-number
show ons alarm defect pos interface-number
Use this command to display the link-layer defects.
Syntax Description
Defaults
N/A
Command Modes
Privileged executive
Usage Guidelines
This command displays the set of active defects for the POS layer and the possible set of defects that can
be set.
Examples
router# show ons alarm defect pos 0
POS0
Active Defects: None
Alarms reportable to TCC/CLI: PAIS PRDI PLOP PUNEQ PPLM PTIM PPDI BER_SF_B3 BER_SD_B3
Related Commands
show controller pos
show ons alarm failure
Parameter
Description
interface-number
Number of the interface (0–1)
Advertising