Show ons alarm defect rpr [interface-number – Cisco 15327 User Manual
Page 525
A-51
Ethernet Card Software Feature and Configuration Guide, R7.2
Appendix A Command Reference
show ons alarm defect rpr [interface-number]
show ons alarm defect rpr [interface-number]
Use this command to display the interface defects on the layer.
Syntax Description
Defaults
N/A
Command Modes
Privileged executive
Usage Guidelines
This command displays the set of active defects for the IEEE 802.17b based RPR and the possible set of
defects that can be set.
Examples
router# show ons alarm defect rpr
RPR-IEEE0
Active: None
Reportable to SC: RPR-PASSTHRU RPR-PROT_ACTIVE RPR-MAX_STATION RPR-MIS_CONF
RPR-RINGLET0_A0_EXCEED_BANDWIDTH RPR-RINGLET1_A0_EXCEED_BANDWIDTH RPR-RI_PEER_MISSING
RPR-RI_FAULT
Related Commands
show ons alarm
Parameter
Description
interface-number
Number of the interface (0–1)