Show ons alarm failure eqpt – Cisco 15327 User Manual
Page 526
Advertising
A-52
Ethernet Card Software Feature and Configuration Guide, R7.2
Appendix A Command Reference
show ons alarm failure eqpt
show ons alarm failure eqpt
Use this command to display the equipment-layer failures.
Syntax Description
This command has no arguments or keywords.
Defaults
N/A
Command Modes
Privileged executive
Usage Guidelines
This command displays the active failures for the equipment layer. If an EQPT alarm is present, the
board fail defect that was the source of the alarm is displayed.
Examples
router# show ons alarm failure eqpt
Equipment
Active Alarms: None
Related Commands
show ons alarm defect
Advertising