Cisco 15327 - Manual (Page 529)

A-55
Ethernet Card Software Feature and Configuration Guide, R7.2
Appendix A Command Reference
show ons alarm failure rpr [interface-number]
show ons alarm failure rpr [interface-number]
Use this command to display failures on a specific IEEE 802.17b based RPR interface.
Syntax Description
Defaults N/A
Command Modes Privileged executive
Usage Guidelines This command displays the set of active failures for a specific IEEE 802.17b based RPR interface. The
display also specifies if an alarm has been demoted, as defined in Telcordia GR-253-CORE.
Examples router# show ons alarm failure rpr
RPR-IEEE0
Active: None
Related Commands show ons alarm
Parameter Description
interface-number Number of the interface (0–1)