A&D Weighing Indicator AD-4329 - Manual (Page 34)

I.U Ivu jwiiVÌHa. Ill
6.3. CF-Functions
Item
Parameter
Description
0 None
rp-PP
i r u u
Decimal point position
Example: 12345
First fipure Example: 1234.5
Second figure Example: 123.45
Third figure Example: 12.345
[F-Oi
Weighing unit
kg.
lb
Ib/kg alternately
iP-OP
Zero range
Turning display on, the .
range to zero display.
±2% of CAP, Tare limit is 100 % CAP
±10% of CAP. Tare limit is 100% CAP
±3% of CAP, Tare limit is 50 % CAP
±4% of CAP. Tare limit is 50 % CAP
CF-OB
Zero track width, motion
detection condition
iJ No limitation
Use limitation at/^-0 / 0, I, B, 1 and F~0B 6, 7 only.
[F-OH
Zero
tracking
0 Gross when displaying gross.
Gross
Gross or Net when displaying net
CF-05
Power-on zero
Not to zero when turning display on.
To zero when turning display on.
[F-OS.
To inhibit preset tare
0 To permit preset tare.
To inhibit preset tare, (ineffective preset tare key)
0
ff-07
Data output of tare
According to F~3D, F~H0.
Using preset tare value and output net, a tare value is
output on manual mode or auto print mode (In CF-03 E,
a tare value is output at all mode except command).
[F~08
Output on over load and
unstable state.
0
Not to output data at unstable value or over load.
It IS effective in key mode.____________
To output data always.
0
[F~0B
Header 2
Gross Net Tare Preset tare
*0 GS NT TR PT
1 GS NT TR PT
E Guj N^ T^ PT
[F- 10
Figure number of unit
for format 1 and
decimal point
0 Two figures . (dot)
Three figures , (dot)
Two figures , (comma)
Three figures , (comma)
Format 1 on standard
serial data output and
RS-232C interface.
Decimal point is effective
at format 1 and 2.
[F-lf
Accumulation function
0 Not used (ineffective)
Use (Effective)
CAP : maximum capacity
6. Functions Page 32 AD-4329 Weighing indicator