A&D Weighing Indicator AD-4329 - Manual (Page 40)

9,2,3. Setting Upper/Lower Limit Values
Step 1 Press the loperaie/Standbyl key to turn the display off.
Step 2 Press and hold the iPRINn key and press the
Qperate/Standbvl key to display J H j | for two seconds.
Step 3 Set the upper limit value (HI) using the following keys.
r> 1 key The key to select a figure.
A key.........The key to select a number.
+/-1 key.....The key to select plus or minus.
key..... The key to store the parameter and
proceed to step 4.
I mod I key ..The key not to change the parameter
and proceed to step 4.
S^6p 4 La is displayed for two seconds.
I/(!)
m m
Display ofl
Q
PRINT I-
Press and hold
Press
1/Ф
0PR/ST8
2seconds И
m/G О
moss Ш0 ТАЙН
> A
Upper limit value
5000
Q
PRIfiT
2seconds I о
Uei/B/G
ZEROTARE
-f/*“ > A
иш
Lower limit value.
Set the lower limit value (LO) using the same keys as step 3.
Step 5 Turn the dsiplay off using the ^pemte/Standbvl key.'
Q
PRINT
OPRiSTB
Display ofi
9.2.4, Example
Result
F-function: f-PO
F'Pl
Upper iinit value: 5000
Lower Unit value: 1000
Condition Formula Range HI (Over) OK (GO) LO (Under)
5000 < Display value
5001
ON OFF
1000 S Display value ^ 5000
5000
1000
ON
5 < Display value < 1 GOO
999
6
ON
Display value ^5
5
OFF
9.2. Upper/Lower Limit Comparison Page 38
AD-4329 Weighing Indicator