1 2.1.5. commands to control the indicator – A&D Weighing Indicator AD-4329 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1 2.1.5. Commands to Control the Indicator
Zero Display
The current display is set to the zero point.
Templete MZ
Command
Reply
M z
ц,|
Ы
'
z
IC
r
IM
Tare
The current display is set to zero of the net value.
Tempiete MT
Command iMirfaNI
Repiy
Clear Tare Value
The tare value is cleared and the gross value is displayed,
Tempiete CT
Command
Reply
|c
T
Lp
к
T
Lp
Display Gross Value
The gross value is displayed.
Tempiete MG
Command [MfGi^N!
Repiy iMlGNM
Display Net Value
The net value is displayed,
Tempiete MN
Command [м[N^QR|ц^(
Reply
AD-4329 Weighing Indicator
Page 47
12. RS-232C interface
Advertising