Denso BHT-7500 - Manual (Page 108)

88
If you select one of "1:DESTINATION IP" through
"5:COUNT" items and press the ENT key, then the
entry box of that item becomes ready to accept
entry and a cursor appears. Enter the desired
value by using the numerical keys and then press
the ENT key.
In the entry mode, to delete a single character,
press the BS key ( SF + C keys). To delete the
whole entry you made, press the C key.
If "6:SEND TYPE" is selected, use the and
keys to choose the desired type.
To return to the TEST PING menu, press the C key
when any item is highlighted.
Entry Range for DATA SIZE, INTERVAL, TIMEOUT, and COUNT
Item Allowable entry range Initial value
DATA SIZE 4 to 1472 56
INTERVAL 0 to 65535 10
TIMEOUT 0 to 65535 10
COUNT 0* to 65535 4
* Specification of zero (0) will set the number of echo requests to be sent to "infinite,"
keeping sending echo requests (until PING is aborted).
If you specify a value out of the allowable entry range listed above, the nearest value
within the range will automatically apply.