Denso BHT-7500 - Manual (Page 55)

35
Chapter 2. Getting Started the BHT and System Mode
(3) Confirming the memory area selected for initialization
Selecting the "USER AREA EXCEPT FONTS" in step
(1) above will call up the confirmation screen shown
at left.
1 Yes : Starts initialization.
2 No : Cancels initialization and turns the power
off.
Select a desired item by using the numerical keys,
then press the ENT key.
Pressing the C key will switch the screen back to
the area selection screen.
Selecting the "WHOLE USER AREA" in step (1)
above will call up the screen shown at left.
1 Yes: Starts initialization.
2 No: Cancels initialization and turns the power
off.
Select a desired item by using the numerical keys,
then press the ENT key.
Pressing the C key will switch the screen back to
the area selection screen.
(4) During initialization
During initialization, the screen shown at left is
displayed.
INITIALIZE SYSTEM
OK?
1:Yes 2:No
Warning
Initializing the whole
user area will lose the
font files.
INITIALIZE SYSTEM
** Initializing **
Progress in
initialization
INITIALIZE SYSTEM
OK?
1:Yes 2:No