Denso BHT-7500 - Manual (Page 86)

66
[4.5-4] Setting the communications protocol type
Selecting the "4:PROTOCOL TYPE" on the SET
COMMUNICATION menu calls up the screen shown
at left.
Highlighted is the current setting.
1 BHT Protocol: Selects the BHT-protocol for
downloading or uploading
files in System Mode or for
the execution of XFILE state-
ment in BHT-BASIC.
This protocol should be se-
lected for file transmission
with Transfer Utility.
2 BHT-Ir Protocol: Selects the BHT-Ir protocol for
downloading or uploading
files in System Mode or for
the execution of XFILE state-
ment in BHT-BASIC.
This protocol should be se-
lected for file transmission
with Ir-Transfer Utility C/Ir-
Transfer Utility E.
Select a desired item by using the numerical keys
or and keys, and then press the ENT key.
To return to the SET COMMUNICATION menu,
press the C key.
PROTOCOL TYPE
1:BHT Protocol
2:BHT-Ir Protocol