Denso BHT-7500 - Manual (Page 170)

150
System down error
■ Problem
An error has occurred during execution of System
Program.
If this error occurs, the BHT beeps five times
(for 0.1 second per beep).
■ Solution
Unload and reload the battery cartridge, then turn
on the power.
If this error occurs frequently, make a note of the
message and codes on the LCD and contact your
nearest dealer.
System administrator to be called
■ Problem
Any of the following errors has occurred:
(1) Hardware error
Calendar clock error: (1010)
Flash memory error: (1020)
(2) Memory storage error (2XXX)
(3) Execution program error (3010)
(4) RF system error (4110)
(XXXX: Error code)
If any of the above errors occurs, the BHT
beeps five times (for 0.1 second per beep)
and then turns itself off.
■ Solution
Turn on the power again.
If error (1) or (4) above occurs frequently, contact
your nearest dealer.
If error (2) occurs frequently, initialize the BHT
System (the whole user area including the font file
area).
If error (3) occurs frequently, delete the execution
program file that causes this error or download
the original execution program file to overwrite
the current one.
System down error!
type:XXXXXXXX R0 :XXXXXXXX
ercd:XXXXXXXX R1 :XXXXXXXX
inf1:XXXXXXXX R2 :XXXXXXXX
inf2:XXXXXXXX R3 :XXXXXXXX
R4 :XXXXXXXX
SR :XXXXXXXX R5 :XXXXXXXX
PC :XXXXXXXX R6 :XXXXXXXX
PR :XXXXXXXX R7 :XXXXXXXX
R8 :XXXXXXXX
R9 :XXXXXXXX
R10:XXXXXXXX
R11:XXXXXXXX
R12:XXXXXXXX
R13:XXXXXXXX
R14:XXXXXXXX
R15:XXXXXXXX
Contact your
administrator.
Note the error
number.
(XXXX)