Denso BHT-7500 - Manual (Page 53)

33
Chapter 2. Getting Started the BHT and System Mode
2.4 Initializing the BHT System
Initializing the system will lose program files and data files stored in the user area and
the system settings will revert to the factory defaults.
You may delete font files by selecting the whole user area to be initialized.
You need to initialize the system when:
(1) you want to delete all of the program files and data files.
(2) the following message appears.
Contact your
administrator.
Note the error
number.
(2XXX)
WEP KEYs defined in the BHT-7500W will not be initialized.
On the following pages is an initialization procedure.