Denso BHT-7500 - Manual (Page 85)

65
Chapter 2. Getting Started the BHT and System Mode
[4.5-3] Setting the interface port
Selecting the "3:COM PORT" on the SET COMMU-
NICATION menu calls up the screen shown at left.
Highlighted is the current setting.
1 BASIC: Selects the optical or direct-
connect interface port to be
used
for user programs
written in BHT-BASIC
(OPEN "COM:").
2 SYSTEM MODE: Selects the optical or direct-
connect interface port to be
used
for downloading or
uploading files in System
Mode.
Select a desired item by using the numerical keys
or
and keys, and then select a desired
setting by using the and keys.
To return to the SET COMMUNICATION menu,
press the C key.
SET COM DEFAULT PORT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector