Denso BHT-7500 - Manual (Page 118)

98
SUB SYSTEM VERSION
Vx.x
MACID [001122334455]
XXXXXXXXXXXX
Parameter save error!!
XXXXXXXXXXXX
Parameter load error!!
[8.2] RF version screen
Selecting "2:VERSION" on the RF MENU displays
the "** Loading **" while the system is getting
information about the wireless module. After that,
the screen shown at left will appear.
Vx.x Firmware version of the wireless module
MACID MACID of the wireless module
To return to the RF MENU, press the C key.
If an error occurs for wireless-module parameters or information:
If some error occurs when the system is saving wireless-module parameters or getting
wireless-module information, one of the following screens will appear.
■ Problem
The system has failed to save parameters into the
wireless module.
XXXXXXXXXXXX: Title of a menu where the
error occurs.
■ Problem
The system has failed to read setting from the
wireless module.
XXXXXXXXXXXX: Title of a menu where the
error occurs.
BHT-7500S