Denso BHT-7500 - Manual (Page 114)

94
Run-time messages in downloading/uploading by FTP
When the BHT is uploading or downloading files by FTP, the following messages may
appear in the bottom of the LCD:
Messages Displays when:
Aborted. Uploading or downloading is interrupted.
Connection error The communications pathway is disconnected.
Device error Failed to open a device.
Downloading Downloading starts.
Download failed Downloading has abnormally ended.
Download finished Downloading has finished normally.
File broken! In uploading, the specified file is broken.
File not found! In downloading, no file is found.
File not selected No file is selected.
File type mismatch! In uploading, the attributes of the file selected in the
SELECT FILE entry box are different from those in the
DIR/FILE entry box.
FTP error During execution of an FTP command, an error has oc-
curred.
FTP opened Connection is established by FTP.
Illegal text format! The format of a received text is illegal.
Opening device Opening a device.
Out of memory! The memory is insufficient for storing files to be down-
loaded.
Out of range! The specified parameter(s) is out of the allowable range.
Parameter error! In downloading, the record length and/or field length
specified in the FIELDS entry box exceed 255.
Program file error! The received program file is illegal.
Routing TCP/IP Connecting to the TCP/IP communications pathway.
Syntax error! A syntax error has occurred.
TCP/IP error Failed to connect to the TCP/IP communications pathway.
TCP socket error During execution of an FTP command, an error has oc-
curred in the TCP layer.
Too many files! The current download will exceed the allowable number
of files in the memory.
Uploading Uploading starts.
Upload failed Uploading has abnormally ended.
Upload finished Uploading has finished normally.