Denso BHT-7500 - Manual (Page 69)

49
Chapter 2. Getting Started the BHT and System Mode
If an error occurs during downloading
If some error occurs during downloading, the BHT beeps three times and shows one of
the following screens with the prompt "Retry?":
To retry the download, press the 1 and ENT keys; to abort it, press the 2 and
ENT keys.
■ Problem
The memory is insufficient for storing files to be
downloaded.
■ Solution
Press the 2 key to return to the SYSTEM MENU,
then delete unnecessary files in the memory or
decrease the size of the file to be downloaded.
(Refer to Subsection 2.5.3, [ 9 ] and [ 2 ].)
■ Problem
The current download will exceed the maximum
of 80 files in the memory.
■ Solution
Press the 2 key to return to the SYSTEM MENU.
Delete unnecessary files in memory or decrease
the number of files to be downloaded if you at-
tempted to download more than one file. (Refer to
Subsection 2.5.3, [ 9 ] and [ 2 ].)
■ Problem
Downloading has failed.
■ Solution
To retry downloading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port, communications param-
eters, and communications protocol type in the
SET SYSTEM menu or perform the communica-
tions test in the TEST menu. (Refer to Subsection
2.5.3, [4.5] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
DOWNLOAD FILE
Out of memory!!
Retry?
1:Yes 2:No
DOWNLOAD FILE
Too many files!!
Retry?
1:Yes 2:No
DOWNLOAD FILE
XXXXXXXX.XXX
Communication error!!
Retry?
1:Yes 2:No