Denso BHT-7500 - Manual (Page 42)

22
(3) Press the 3 key on the SET SYSTEM screen
to select the "DATE/TIME" and then press the
ENT key, and the screen shown at left will
appear.
(4) Use the numerical keys to enter the year (only
the last two digits), month, day, hour, and
minute in this order. If the data is in one
digit, add a 0 (zero) preceding the data.
For the year, be sure to enter the last two
digits of the year. For the hour, enter it
in the 24-hour format.
If any of the year, month, day, hour, and
minute is not entered, the ENT key
will be deactivated.
If you make a wrong entry, press the BS key
( SF + C keys) to delete it and then enter the
correct data.
SET DATE/TIME
00/01/01 00:00
_ / / :
(1) While holding down the SF and 1 keys,
press the PW key to start System Mode. The
SYSTEM MENU shown at left will appear.
(2) Press the 4 key to select the "SET SYSTEM"
on the SYSTEM MENU and then press the
ENT key, and the screen shown at left will
appear.
(To return to the immediately preceding
screen during this setting procedure, press
the C key.)
SYSTEM MENU
1:EXECUTE PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST
6:VERSION
7:FTP
8:RF
SET SYSTEM
1:EXECUTE PROGRAM
2:DISPLAY
3:DATE/TIME
4:BARCODE
5:COMMUNICATION
6:KEY
7:RESUME
8:TCP/IP
("7:FTP" and "8:RF" supported by
the BHT-7500S/7500W only)
("8:TCP/IP" supported by the
BHT-7500S/7500W only)