Denso BHT-7500 - Manual (Page 46)

26
2.3.4 Battery Voltage Display
The battery voltage level is always displayed on the status indicator line (bottom line).
The displayed battery level shows the terminal voltage of the battery, not how
much power is left.
The battery voltage level varies depending upon the operation of the BHT, so the
displayed level also may vary.
Battery voltage level
Shows the current battery voltage level.
If the voltage level is high, three bars appear;
if low, a single bar appears.
2.3.5 Synchronization Display in Radio Communica-
tion (BHT-7500S/7500W only)
When the BHT is synchronized with an access point during radio communication
(spread-spectrum communication), a bar appears on the LCD as shown below.
The synchronization display indicates that
the radio link is established but does not as-
sure you that there will be few communica-
tions errors.
Indicates that the BHT is
synchronized with an
access point.
Status Indicators