Denso BHT-7500 - Manual (Page 68)

48
With this screen displayed, the BHT waits for a file
to be downloaded.
If you select "2:HT<-->HT" on the DOWNLOAD
menu, the "HT<-->HT" will appear in the center of
the 2nd line. If you select "1:FILE," nothing will ap-
pear on the 2nd line.
The screen at left shows that "1:FILE" has been se-
lected.
Upon start of optional Ir-Transfer Utility C/Ir-Trans-
fer Utility E/Transfer Utility or equivalent program
(upon receipt of an ENQ code from the host com-
puter), the BHT displays the screen shown at left.
(Refer to the "Ir-Transfer Utility C Guide"/"Ir-Trans-
fer Utility E Guide"/"Transfer Utility Guide.")
While the downloading operation is in progress,
the screen shown at left is displayed indicating the
file name and the number of received records/the
total number of records.
To abort the downloading operation, press the
C key. The screen will switch back to the DOWN-
LOAD menu.
Download screens
⇓
DOWNLOAD FILE
** Waiting **
DOWNLOAD FILE
** Loading **
DOWNLOAD FILE
XXXXXXXX.XXX
** Loading **
XXXXX/YYYYY
⇓
Upon completion of downloading, the number of
received records becomes equal to the total num-
ber of records and the beeper beeps once. Press
the C key to return to the DOWNLOAD menu.
If the host computer downloads another new file (if
the BHT receives an ENQ code) when this screen is
displayed, the BHT starts receiving it.
(Refer to the "Ir-Transfer Utility C Guide"/"Ir-Trans-
fer Utility E Guide"/"Transfer Utility Guide.")
If you have selected "2: HT<-->HT COPY" on the
DOWNLOAD menu, a sequence of the above
screens will be repeated by the number of files to
be downloaded.
DOWNLOAD FILE
XXXXXXXX.XXX
** Completed **