MOCET IG7600 - Manual (Page 24)

IG7600 Administration Manual
3.33 System Speed Dial
IG7600 stores frequently dialed numbers. These Speed Dial Numbers are accessed for
dialing by the associated Speed Dial Directory Numbers. The Speed Dial Directory
Numbers are assigned in Numbering Table. The Speed Dial is only for outgoing calls.
IG7600 stores up to 100 Speed Dial Numbers. In the Speed Dial Number, it’s allowed to
store Phone number up to 20 digits in length. Call Restriction and Call Routing are applied
and extensions may utilize only those numbers allowed based on their extension COS.
3.34 System Time & Date
The IG7600 system provides a built-in time clock to track System Time for reference in
certain features such as day/night service mode. This clock has the ability to
automatically adjust with network NTP server through internet.
The IG7600 also supports to use manual time setting. Because IG7600 doesn’t support
battery backup, the time setting may need to be reset when rebooting the IG7600.
System Time & Date can be applied to Smart Phone and IP Phone.
3.35 Trunk Group
The Trunk Group feature is used to assign each PSTN Trunk and IP Trunk to a specific
Trunk Group. Each Trunk can be assigned to only one Trunk Group. The Trunk group
assignment is used for Trunk pool access. If setting some PSTN trunks and some IP
trunks into the same Trunk Group, the trunk access sequence will depend on the access
priority and the search order. The IG7600 provides up to 4 selectable Trunk Groups. All
PSTN Trunks and IP Trunks are assigned to Trunk Group 1 by default. For the four
groups you can choose IP first or PSTN first if programming PSTN and IP Trunk in the
same group. This will take effect if call routing entry’s destination has been set as Group
choice
Group All is a special group that all trunks are included in.
3.36 UCD (Uniform Call Distribution) Group (or Hunt Group)
IG7600 supports 4 UCD Groups. Each UCD Group can have up to 50 members. There
are three kinds of UCD Group mode – All Ring, Linear, and Distributed. For All Ring
mode, incoming Trunk calls ring all member extensions simultaneously. For Linear mode,
incoming call is put into a queue and then distributed from the first extension. For
Distributed mode, it is the same as Linear but selection of an extension is uniformed.
If more than one call rings at the same time, the first agent to go off hook will be
connected to the call that has been ringing the longest.
For unanswered Trunk call, it will be forwarded to a Reroute destination. The Reroute
destination can be AA Menu, Voice Mail, Phone Extension or Virtual Extension.
The missed UCD Group calls are recorded in UCD Call Log. It records the last 100
missed UCD Group calls.
3.37 IGW Group
IG7600 can discover other IG dynamically to build up an IGW Group. You can use IGW
Group as a call routing way to expand your voice system conveniently.
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 18 of 127