MOCET IG7600 - Manual (Page 39)

IG7600 Administration Manual
4.32 Plug & Play
While connecting IP2061/M22/M62 to IG7600’s LAN port, it will register to IG7600
automatically. IG7600 will also assign a valid extension number to the phone directly.
When IP2061/M22/M62 and IG7600 connect to the same Router, IG7600 will assign a
valid extension number to the IP2061/M22/M62 also.
IG7600 will do Plug & Play with M54(-i) only when the pairing button is pushed.
4.33 Reminder Tone
Play stutter dial tone to remind the user that DND or DCFW is enabled at your extension.
If having MWI, it also plays the stutter dial tone
4.34 Service Mode Switching
The feature can be used by Operator phone only. Operator uses a programmed key or by
feature access code to change IG7600 Service Mode.
*791: assign to Day mode.
*792: assign to Night mode
*793: assign to Time mode
IG7600 also provide a feature code “*790” to switch the Service mode. The rule is
- If “Service Mode” setting is “Day”, it changes the setting to “Night”.
- If “Service Mode” setting is “Night”, it changes the setting to “Day”
- If “Service Mode” setting is “Time”, it changes the Service Mode temporarily. The
change will be clean when it reaches the time in “Time” service mode.
When the “*790” is programmed on the line key, it shows the current operating mode on
the LED indication (the LED is lighten on Night time, dark on Day mode).
4.35 Transfer / Recall
Transfer is used to deliver calls at your extension to another extension. It means that calls
can be routed to IG7600’s system destinations: an extension or an outside phone
number.
When transferring a trunk call to another extension, if the call is not picked up within 30
seconds, the call will be recalled back to the transferring extension.
IP2061/M22/M62/M54(-i) Phone supports Blind Transfer, Unscreened Transfer, and
Screened Transfer.
FXS phone supports Unscreened Transfer, and Screened Transfer.
4.36 Volume Control
The IP2061/M22/M62 is equipped with a volume control that is used to adjust the various
volume settings of the telephone. The following functions can be adjusted:
• Ringing
• Handset
• Speaker
• Headset
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 33 of 127