MOCET IG7600 User Manual
Page 27
IG7600 Administration Manual
With this setting IG A’s Ext 299 can transfer a call from 201 to IG B’s Ext 101 by dialing 101
directly.
Get Ready
[IG7600 programming—IGW Group]
IGW Name: The name of IG. It will be referred for the other IGs.
Run Mode: The mode that IG is running. IG can run in Master Mode or Slave Mode.
Master Mode: When IG is running in master mode, it maintains an IG list table. When the
master found that some slave IG changes its name or IP address, it will broadcast to all of
other slave IGs in this list and let them update their own IG list table.
Slave Mode: When IG is running in slave mode, the master IG IP address should be
configured. When its name or IP address changed, it will inform the master IG. And then the
master IG will let other IG know this change.
Slave mode:
Copyright 2013 Tecom, Co. LTD. All rights reserved
Page 21 of 127