MOCET IG7600 - Manual (Page 94)

IG7600 Administration Manual
For other items, if “Timer Enable” is YES, the incoming call will be transferred to
another UCD Group’s member every “No Answer Time”. If NO, the call will ignore “No
Answer Time” and finally reroute to “Reroute Destination” after “Reroute Time”.
“Reroute Destination” can be an Auto Attendant Menu, an extension, a virtual
extension, or phone extension’s mailbox. “UCD Group Name” is shown on the phone
when receiving the UCD Group call.
Start Pickup Group number: The start number is used as All Pickup number. The
next 4 numbers are used for the four pickup groups.
System Speed Dial: Speed Dialing allows you to store frequently outgoing numbers.
There are 100 sets to be configured. Extension’s Class of service (COS) can also be
checked or not. (Figure 6-64)
Figure 6-64. Voice – System – Speed Dial
Start Call Park Number: IG7600 supports to park 4 trunk calls maximum. The Call
Park number can be programmed on the line keys.
Start Conference Room Number: Conference Room Number allows the users to
build a conference conversation.
6.6.3.2 Service Mode
This page allows you to configure the Day/Night/Time service mode. You can also
customize the working time manually for each weekday.
If you choose Time Mode, it’s for the specified day of week. The time is entered in
24-hour format. Valid entries are 00:00 to 23:59 in 1-minute increments. The first four
digits are for the start time. The last four digits are for the end time. (Figure 6-65)
Working Hours: It’s applied in Answering Positions and Auto Attendant Greeting.
Lunch Break: It’s applied in Auto Attendant Greeting
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 88 of 127