MOCET IG7600 - Manual (Page 52)

IG7600 Administration Manual
The Dynamic Host Configuration Protocol (DHCP) is an Internet protocol for automating
the configuration of computers that use TCP/IP. DHCP can be used to automatically
assign IP addresses, to deliver TCP/IP stack configuration parameters such as the
subnet mask and default router, and to provide other configuration information.
This page shows the setting of WAN interface which is DHCP mode (Figure 6-9).
Figure 6-9. Advanced – WAN (DHCP Mode)
The Point-to-Point Protocol over Ethernet (PPPoE) requires a user name and password
that your ISP has provided to you to establish your connection. This page shows the
setting of WAN interface which is PPPoE mode (Figure 6-10).
Figure 6-10. Advanced – WAN (PPPoE Mode)
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 46 of 127