MOCET IG7600 - Manual (Page 36)

IG7600 Administration Manual
4.17 Do Not Disturb (DND)
Extension users can enable DND to reject all incoming calls. The DND on an extension
can be allowed or denied through the feature access code.
To enable the Do Not Disturb feature, dial *4.
To disable the Do Not Disturb feature, dial **4.
DND and FWD can be set independently. If multiple features are set at the same time, it is
applied in the order of Direct FWD > DND > Busy/No Answer FWD.
4.18 DSS/EDM
IG7600 supports to provide the status of the extensions and trunk lines. The status can be
shown on the LED of IP2061/M22/M62’s flexible keys. For IP2061, M22 and M62, they
support EDM modules that can have 24 more keys.
PS: basically the button lamp will light when the button’s corresponding
destination is busy, but when the destination is an M54(-i), the lamp will not lit
under the same circumstance.
4.19 Feature Button Reset
The feature is used to reset all feature buttons to be the same as the current settings in
IG7600.
To reset the Feature Buttons, dial *68 + (Password)
4.20 Feature Key Programming
Feature Keys can be programmed by phone users. A feature key can be programmed for
line appearance.
To program a Feature Key, dial *70 + (Feature Key number: 01 – 04/44
(*)
) + (Feature
Key Type; 00 - 08) + Number
Feature Key Type:
00: Null; Number should be null.
01: Extension; Number can be an Extension or Virtual number.
02: Trunk; Number can be a PSTN, IP Trunk or Trunk Group number.
03: Call-Park; Number can be a Park number.
04: Feature Key; Number can be a feature access code
05: Others; Number could be an outside phone number.
06. Do Not Disturb; Number should be null.
07: Live Record
08: Virtual Mailbox key; Number can be a Virtual number.
Note: IP2061, M22 and M62 supports EDM module, it provides 24 more keys for feature
access.
4.21 Feature Reset
When the feature is activated, the extension will return the features that can be
programmed through feature codes to default settings. It will affect the following options:
Call Waiting disabled
Call Waiting Tone Enabled
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 30 of 127