MOCET IG7600 User Manual

Page 92

Advertising
background image

IG7600 Administration Manual

Figure 6-61. Voice – System – Numbering Plan – Operator Configuration

Operator day: It’s the system operator number during day. If dial Operator
speed-dial number, this extension will be called during day.

Operator Night: It’s the system operator number during night. If dial Operator
speed-dial number, this extension will be called during night.

Alternate Operator day: When the Operator during day does not answer a call, the
call will be rerouted to alternate operator during day.

Alternate Operator night: When the Operator during night does not answer a call,
the call will be rerouted to alternate operator during night.

Reroute Time: Set the length of operator no answer time to reroute to alternate
operator. The time is applied to the call for alternate operator also. If alternate
operator doesn’t answer the call in the Reroute time, the call is reroute to Operator’s
Voice Mail box. “0” means it keeps ringing to the operator.

Start AA&VM Service Number: IG7600 provides 10 menus. If dial this number,
internal user can enter IG7600’s voicemail system and do some operations such as
listening personal message.

Start Virtual Extension Number: IG7600 provides virtual extension number for the
members not works in the office, or as a secondary mailbox.

Start PSTN Line number: IG7600 provides 4 PSTN lines at most. Every line has its
own internal alias number. You can dial these numbers directly to access PSTN trunks.

Start IP Trunk number: IG7600 provides 12 IP Trunk lines at most. Every line has its
own internal alias number. You can dial these numbers directly to access IP Trunks.

Start Trunk Group number: IG7600 provides 4 trunk groups at most. If dialing trunk
group number,

All Paging number: If dialing this number, all internal IP2061/M22/M62 will be paged.

All Paging range: You can select the range of the paged extensions. If it’s LAN, it
pages the IP2061/M22/M62 on IG7600’s LAN side. If it’s WAN, it pages the
IP2061/M22/M62 on IG7600 WAN side, but under the same Router with IG7600. If it’s
Both, it pages the all IP2061/M22/M62 on LAN and WAN.

Copyright 2013 Tecom, Co. LTD. All rights reserved

Page 86 of 127

Advertising