MOCET IG7600 - Manual (Page 77)

IG7600 Administration Manual
If Mac binding exists, only the extension with this Mac address will be accepted to be
registered.
Allow Open Door: This field is for user to configure if the extension is allowed to open
door.
Day COS: The field assigns Class of Service for day mode operation. Acceptable
values are 0-7. At default, all extensions are unrestricted.
Night COS: The field assigns Class of Service for night mode operation. Acceptable
values are 0-7. At default, all extensions are unrestricted.
Pickup Group: The field assigns the extension to a specific pickup group. Each
extension can be assigned to one pickup group only. Four pickup groups are available.
FXS Phone: It shows the FXS phone number. It’s programmed in Numbering Plan.
- Display Name: The FXS user’s Calling Name.
- Day COS: The FXS’s Class of Service for day mode operation.
- Night COS: The FXS’s Class of Service for night mode operation.
- Pickup Group: The FXS’s pickup group number
Door Phone Authentication:
It provides two door phones to register. Phone number, password and Mac Address
are for door phones to do Authentication. If Mac Address is empty, the entry is free to do
register for any door phone, but if mac Address is filled with a special mac address, the
entry is bind to the door phone with this mac address and only this door phone can use
this account to do register.
Registration Configuration:
The settings allow you to change the parameters for SIP Registration. You need to
reboot the system to make the changes to take effect.
Minimal Expire: Minimal registered period of IP phone.
SIP Port: The IG7600 listens for requests on the SIP port. This port is used for UDP
application and 5070 is its default value. The port number cannot be the same as the
“Local SIP Port for IP Trunk” for IP Trunk application.
Session Timeout:
The settings allow you to change the parameters for session timer.
Session Timeout: It defines how long IG7600 sends “UPDATE” packet to extension.
6.6.1.2 Video Doorphone Settings
This page allows you to configure the settings for door phone’s features.(Figure 6-47)
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 71 of 127