MOCET IG7600 - Manual (Page 53)

IG7600 Administration Manual
6.4.2 Secondary WAN
IG7600 supports secondary WAN which is dedicated for IP Trunk. If you check “Enable
Secondary WAN” then it will turn LAN port into secondary WAN port. And you still can use
wireless interface for LAN access. Regarding secondary WAN settings, please refer to
6.4.1 WAN settings.
6.4.3 LAN
It allows you to set LAN IP and Subnet Mask for LAN interface. A DSP IP address can be
configured for FXO/FXS application. You can also enable or disable DHCP Server and
configure related settings. End IP Camera Address cannot be configured; it is generated
automatically when you configure the Start IP Camera Address. The “Static IP Lease List”
allows to program 32 entries to have the fixed IP address for the specified devices. If
needed, it can also configure the second IP address and Subnet Mask for the LAN
interface (Figure 6-11).
Info: If the DHCP Pool is changed, and the new “Start IP Address” is bigger than
the older one or the new “End IP Address” is smaller than the older one, the Static
IP Lease List will be cleared automatically.
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 47 of 127