MOCET IG7600 - Manual (Page 37)

IG7600 Administration Manual
Paging Accept
Default Feature Key Setting
Phone Lock disabled
Call Forward (Direct, Busy, No Answer, DND, Call Fork) disabled
DND disabled
Agent Log on
Auto Answer disabled
Distribution List clean
To activate the Default Setting feature, dial *69+ (Extension Password or Administrator
Password).
4.22 Hold Reminder
IP2061/M22/M62 provides a programmable timer to remind you that a call has been left
on Hold. When enabled, you will hear one ring tone repeated each time the selected hold
time expires.
4.23 Hotline
The feature allows an extension to automatically access a given resource each time the
extension goes off hook. The resource can be any system directory number or outside
phone number. It can access the desired resource from 0 to 8 seconds after the
extension goes off hook. The delay allows the user to dial another resource before the
hotline takes effect.
If the “Hotline Delay Time” of FXS is 0, it can cancel the setting by pressing Flash key
after making a hotline call. Then dial the feature access code.
To enable, dial *9* + (any Number) + * + Time //Time: 0~8 seconds; 0: immediately
To disable: **9*
4.24 Live Recording (One Touch Record)
The Live Recording feature can be activated by using the Live Recording feature key on
your telephone. When activated during an active call, the Live Recording feature will
record the conversation as a voicemail message. After finishing the recording, the
recording will be as a new leaving message into the extension’s mailbox.
During the recording, the LED of the Live Recording key is lit. Press the key when it’s lit, it
will stop the recording. When the call is held or released, it stops the recording also. After
stopping the recording, it disallows to enable it again in 10 seconds.
It allows having 4 Voice Recording calls maximum simultaneously. The maximum
recording time is 30 minutes. Live Recording feature isn’t applied in the conference call.
4.25 Multi-Line Appearance
IG7600 provides PSTN line and IP line status to IP2061/M22/M62, it also provides PSTN
line or IP Line status to M54(-i).
Trunk LED:
Dark – the line is Null or Idle
Fast Flash – the line is ringing
Slow Flash – the line is held
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 31 of 127