Pitney Bowes DI600 Inserting System - Manual (Page 32)

3 • Operator Functions
3-2 SV40221 Rev. C
About this Chapter
This chapter explains functions on the machine that can be carried
out by an Operator. This includes:
• Selecting and running a pre-programmed Job Definition
• Using the SwiftStart™ mode
• Using the Manual Feeder
• Loading the feeders
• Filling the sealer
Functions that can only be carried out after entry of a Supervisor
Access Code are described in the next chapter, ‘Supervisor
Functions’.
Connecting Power
Read the safety information on
page 1-2 before connecting the machine.
Connect the power cord to the socket on the back of the machine.
Plug the power cord into a suitable power outlet. Make sure the
power outlet is near the machine and is easily accessible.
Turn the machine power switch
ON.