Pitney Bowes DI600 Inserting System - Manual (Page 91)

Troubleshooting • 6
6-3 SV40221 Rev. C
Problem Remedy Page
MACHINE
Blank Screen
No power.
Check power cord is firmly
connected and wall socket is
switched ON.
3-2
Machine not
switched ON.
Turn power switch (located on
lower front) ON.
3-2
Display adjustment
set too low for
proper visability
Turn machine off and on. Adjust
display adjustment to an acceptable
setting.
3-21
Performance
Machine runs
slowly.
Is Safe Seal selected? ( icon
in Icon Tree). Safe Seal provides
improved sealing of 'difficult'
envelopes, but slows machine
operation.
3-21
Insertion Problems
Outer Envelope
contents do not
enter the envelope
correctly.
Check envelope troubleshooting
table.
Check envelope depth setting for
the job is correct within the Edit Job
function.
If running heavy or light material,
the Envelope Stop Adjustment
might need changing.
6-4
4-4
6-15
General Troubleshooting