Pitney Bowes DI600 Inserting System - Manual (Page 54)

4 • Supervisor Functions
4-2 SV40221 Rev. C
About this Chapter
This chapter describes the functions available within the Supervisor
Functions menu.
All of the functions are set by following a sequence of screens and
answering simple questions presented on the display. Therefore,
this chapter does not take you through every function step by step. It
gives you background information on the function and offers helpful
tips to get the best out of your machine.
Supervisor Access Code
Before you can access any of the functions in this menu you must
enter a Supervisor Access Code. This prevents unauthorized access
to functions mainly related to administration of jobs and OMR.
Your installing engineer will tell you the Supervisor Access Code. If
you wish, you can write it in the box on this page as a reminder.
However, please be aware that this is then available to anyone
using this Operator Guide and so you may wish to make a note
of it and keep it in a more secure location.
The Supervisor Access Code cannot be changed from the one given
to you by the installing engineer.
Supervisor Access Code:
Entering the Code
When asked to enter the Supervisor Access Code, use the ▲▼◄►
keys to highlight the first digit of the code on the Numeric Matrix
displayed, and confirm this digit by pressing OK. Repeat for the
second digit. When complete, select Finished.