Pitney Bowes DI600 Inserting System - Manual (Page 60)

4 • Supervisor Functions
4-8 SV40221 Rev. C
OMR Menu
This function lets a Supervisor setup Optical Mark Recognition
(OMR) codes for inclusion within Job Definitions.
All OMR functions are explained fully within Chapter 5 - OMR.
System Menu
What is it?
This menu lets a Supervisor adjust the following system setting:
● Manual Feed Setup
Where is it?
From the Home Screen...
select Menu
select Supervisor Functions
enter the Supervisor Access Code (see page 4-2)
select System Menu
Manual Feed Setup
Ignore/Feed Inserts
This function lets a Supervisor choose whether or not the Insert
Feeder(s) are active when a Manual Feed operation is carried out.
The default setting is for both Insert Feeders to be ignored with a
Manual Feed. Changing this setting will feed Insert(s) from either or
both Insert Feeders, if they are loaded.
Seal Option
This option lets a Supervisor choose to use Seal; Safe Seal (see
page 3-21) or not to Seal the Outer Envelope when a Manual Feed
operation is carried out.
For more details of Manual Feed see page 3-11 of this guide.