Pitney Bowes DI600 Inserting System - Manual (Page 80)

5 • Optical Mark Recognition (OMR)
5-20 SV40221 Rev. C
A
B
TOP OF SHEET/
LEAD EDGE OF INSERT
Defining the first mark position and code length
Take a sheet/Insert that has at least the FIRST and LAST OMR
mark printed on it.
When requested by the machine, measure and enter the distance
(A) from the top edge of the sheet or the lead edge of the Insert to
the FIRST OMR mark, in millimeters.
Again, when requested by the machine, measure and enter the
distance (B) from the FIRST OMR mark to the LAST OMR mark, in
millimeters.