Pitney Bowes DI600 Inserting System - Manual (Page 37)

Operator Functions • 3
3-7 SV40221 Rev. C
Automatic Processing
After confirming a Trial Piece is OK...
Press the
Start key to begin automatic operation.
The machine will operate until:
● material runs out
● the Stop key is pressed
● the batch count is reached (if batch count is being used)
● the first Select Feed sheet is fed (if the Select Feed feature
in OMR is being used).
● the OMR ‘Stop’ feature is activated (see page 5-4 for more
details).
Batch Count
If the Batch Count function was set when the job was created, the
machine will stop automatically after processing the required number
of Mail Pieces. Remove the batch of Mail Pieces and press Start to
resume processing.