Altera Transceiver PHY IP Core User Manual

Page 449

Advertising
background image

Parameter

Range

Description

Enable rx_10g_frame_skip_err port

On/Off

When you turn this option On, the 10G

PCS includes the

rx_10g_frame_skip_

err

output port. This signal is asserted

to indicate the frame synchronization

has received an erroneous word in a

Skip control word location within the

Metaframe. This signal remains asserted

during the loss of block_lock and does

update until block_lock is recovered.

Enable rx_10g_frame_diag_err port

On/Off

When you turn this option On, the 10G

PCS includes the

rx_10g_frame_diag_

err

output port. This signal is asserted

to indicate a diagnostic control word

error. This signal remains asserted

during the loss of block_lock and does

update until block_lock is recovered.

Enable rx_10g_frame_diag_status port

On/Off

When you turn this option On, the 10G

PCS includes the

rx_10g_frame_diag_

status

2-bit output port per channel.

This port contains the lane Status

Message from the framing layer

Diagnostic Word, bits[33:32]. This

message is inserted into the next

Diagnostic Word generated by the

frame generation block.

Interlaken CRC32 Generator and Checker

CRC-32 provides a diagnostic tool on a per-lane basis. You can use CRC-32 to trace interface errors back

to an individual lane. The CRC-32 calculation covers the whole metaframe including the Diagnostic

Word itself. This CRC code value is stored in the CRC32 field of the Diagnostic Word. The following

table describes the CRC-32 parameters.

Table 14-28: Interlaken CRC32 Generator and Checker Parameters

Parameter

Range

Description

Enable Interlaken TX CRC32 Generator

On/Off

When you turn this option On, the TX

10G PCS datapath includes the CRC32

function.

Enable Interlaken RX CRC32 Generator

On/Off

When you turn this option On, the RX

10G PCS datapath includes the CRC32

function.

Enable rx_10g_crc32_err port

On/Off

When you turn this option On, the 10G

PCS includes the

rx_10g_crc32_err

port. This signal is asserted to indicate

that the CRC checker has found an error

in the current metaframe.

14-38

10G PCS Parameters for Arria V GZ Native PHY

UG-01080

2015.01.19

Altera Corporation

Arria V GZ Transceiver Native PHY IP Core

Send Feedback

Advertising