Altera Cyclone II FPGA Starter - Manual (Page 49)

Altera Corporation 6–7
October 2006 Cyclone II FPGA Starter Development Kit User Guide
Advanced Examples
1. Format the SD card into FAT16 format.
2. Playing a music file with this demonstration requires that the file
use the WAV format. Copy one or more such WAV files onto the
FAT16-formatted SD card. Due to a limitation in the software, to
remove any WAV file requires reformatting the whole SD card.
3. Load the bit stream into the FPGA.
4. Run the Nios II IDE under the workspace
CII_Starter_SD_Card_Audio.
5. Connect a headset or speaker to the development board and listen
for music played from the SD Card.
Figure 6–4 illustrates the setup for this demonstration.
Figure 6–4. The Setup for the SD Music Player Demonstration