BINDER C 150 - Manual (Page 82)

C 150 (E2) 12/2012 page 82/90
19.7 Equipment and options C 150
To operate the CO
2
incubator, use only original BINDER accessories or accessories / compo-
nents from third-party suppliers authorized by BINDER. The user is responsible for any risk
arising from using unauthorized accessories.
Regular equipment
Microprocessor display controller with 2-channel technology for temperature and CO
2
CO
2
infra-red absorption measuring system
Fan-assisted air jacket system
Hot-air sterilization at 180 °C / 356°F
Gas mixing head
Weldless deep-drawn inner chamber made of stainless steel 1.4301/V2A, polished
Electronic error auto-diagnosis system with zero-voltage relay output
Temperature safety device class 3.1 acc. to DIN 12880
Lockable door
Tightly closing inner glass door
3 perforated shelves, stainless steel 1.4301/V2A
C 150-UL: Test mark CUL
Options / accessories
Perforated shelf, stainless steel
Door hinged left (option only available when ordering the unit, no retrofitting)
Silicone access ports, closable with 2 silicone plugs 30 mm / 1.18 in , rear, left or right side
Analog outputs 4-20mA for temperature and CO2, with DIN socket 6-poles, DIN plug included
Base on castors
Stacking adapter for direct, thermally decoupled stacking
Gas cylinder connection kit
Pressure reducer
Cleaning kit (neutral cleaning agent, disinfection spray and lint-free disposable wipes, protective gloves
and safety goggles)
Calibration of temperature and CO2 including certificate
Spatial temperature measurement including certificate
Spatial temperature measurement acc. to DIN 12880 including certificate
Qualification folder