BINDER CB 60 - Manual (Page 37)

CB (E6) 09/2013 Page 37/144
4.5 Handling and aligning the multiple-divided inner glass door, gas proof
(optional equipment)
Rubber profile gasket of
individual glass door of
the divided inner glass
door
Hinge of the set-in
divided inner glass door,
with elongated holes to
align the glass door
Measuring access port
Figure 14: Multiple-divided inner glass door, gas proof, for CB 160
• Pull the handles to open each of the individual glass doors. Do not press too hard while closing them
to avoid pushing the doors through the gasket into the inner chamber.
• The rubber profile gaskets of the individual glass doors are easy to replace.
• If the divided inner glass door is not in an aligned position, fasten the hinge screws in the elongated
holes of the hinge to align it. Align the door and operate the locking smoothly.