BINDER CB 60 - Manual (Page 64)

CB (E6) 09/2013 Page 64/144
9.5 Changing the temperature unit
To select the temperature unit, go to Menu > Settings > Temperature unit
Fixed value 08.03.2013 05:05:06
Submenu “Temperature unit”.
Select the desired temperature unit”
and press the operating button.
..\ Temperature unit
Celsius [°C]
Fahrenheit [°F]
Kelvin [K]
Close Home
Go back to the “Settings” menu with “Close” or to the initial view with “Home”.
9.6 Defining the data recording rate
To define the recording rate for data storage on the SD card, go to Menu > Settings > Recording rate
Fixed value 08.03.2013 05:05:06
Entry menu “Recording rate”.
The current recording rate is shown. Enter the
desired value with the operating button.
Shortest possible value: 60 seconds.
Press the “Ok” button to confirm.
..\ Recording rate (seconds)
6 0
6
Ok 0 1 2 3 4 5 7 8 9 . – Del Ins
Close Ok Home
Go back to the “Settings” menu with “Close” or to the initial view with “Home”.
Note:
After a period of 3 years, the controller starts overwriting the oldest values on the storage medium. This is
independent of the selected storage interval and the actual operating time of the chamber. In any case,
the data can be read out at any time using the function “Export to USB drive” (chap. 10.1) and stored
externally.