Proceed CDP - Manual (Page 7)

7
Operating Voltage
& Frequency
The CDP Compact Disc Processor is set at the factory (internally) for 100V, 120V,
200V, 220V, or 240V AC mains operation as appropriate for the country in which
it is to be sold. (230V/50Hz only in European Union countries, in compliance
with CE regulations.) Make sure that the label on the rear panel of the CDP (be-
side the AC input receptacle) indicates the correct AC operating voltage for your
location. Attempting to operate the CDP at an incorrect voltage can damage the
unit.
Neither the voltage nor the line frequency setting may be changed by the user.
Voltage label
WARNING: BEFORE ATTEMPTING TO OPERATE THIS DEVICE,
REFER TO OWNER’S MANUAL FOR PROPER OPERATING
INSTRUCTIONS AND SAFETY PRECAUTIONS. HAZARDOUS
VOLTAGE AVAILABLE INSIDE; DISCONNECT AC – MAINS
CABLE BEFORE OPENING UNIT.
d e s i g n e d a n d m a n u f a c t u re d i n U S A
MADRIGAL AUDIO LABORATORIES, INC.
No User Serviceable Components Inside.
For service, contact Madrigal Audio Laboratories or an Authorized
Dealer. Any modification to this equipment will void all warranties.
cdp
S/N
PR O C E E D R
If the AC mains voltage or frequency indicated on your CDP is incorrect, please
contact your local, authorized Proceed dealer or distributor.
The CDP can easily be powered by a normal 15-ampere AC mains line. If other
devices are also powered from the same AC line, their additional power con-
sumption should be taken into account.