Proceed PDSD User Manual
Page 47
47
4
SELECT “DEFAULT,” “FORCE ON,” OR “FORCE OFF” AS THE SETTING FOR
YOUR SUBWOOFER IN THIS SURROUND MODE
If you simply leave this setting as
default
for all your surround modes, the
PAV/PDSD system will always use the default speaker settings from the
set
speakers
menu.
If you prefer to include a subwoofer for movies and remove it when listen-
ing to music, you should
set speakers
for a biamplified system (80 Hz con-
figuration settings), set the movie-related surround modes for
sub: force on
,
and set the music-oriented surround modes to
sub: force off
. This way, your
subwoofer will automatically be engaged or disengaged as you change be-
tween (for example)
discrete
and
stereo surround
.
5
PRESS “ENTER” TO SAVE YOUR CHANGES; REPEAT FOR ALL OTHER
SURROUND MODES AS NEEDED
Note that if you change only a single surround mode, the others will re-
mains at their factory default settings of no offsets and
sub mode
=
default
.
This will cause even offsets entered at the front panel to be reset to all ze-
ros when surround modes other than the one you changed are selected.
(All the more reason to live with the system for a while before electing to
customize it in this way. You should know your preferences with a fair de-
gree of certainty before automating them to this degree.)